|Type D gaskets are designed to fit into the ring groove of RTJ (ring type joints)
flanges. We also offer BX gaskets. Both are available in grade CE phenolic.
|This style kit contains a full-face gasket that has the same outside diameter as the
flanges. This style gasket will prevent foreign material from collecting and creating
a bridge, thus shorting the cathodic isolation. Type E gaskets are available in
phenolic, neoprene-faced phenolic, and high temperature materials.
|This Gasket has a sealing element on each side and is available in both Type E
and Type F styles. The sealing element materials are Nitrile, Viton, or Teflon.
Gasket materials are phenolic and G-10
|Each Isolation Gasket Kit from Drake Specialties is
individually packaged in a durable box. The isolation
sleeves and washers are packaged separately in the box
to protect them during shipping. Each box is labeled with
flange size, pressure rating, type of isolating sleeves,
and whether it is a single or double washer set.
|This gasket will fit only the raised face surface of the flanges. The outside
diameter of the gasket is slightly less than the inside diameter of the bolt circle.
This gasket can be used on both raised face and full face flanges. It is
recommended that the flanges be wrapped with Flange Band Protectors, or similar
device, to prevent foreign material from collecting and creating a bridge, thus
shorting out the isolation. Type F gaskets are available in phenolic,
neoprene-faced phenolic, and high temperature materials.